| After-sales Service: | Yes |
|---|---|
| Warranty: | Yes |
| Type: | Seamless |
|
Still deciding? Get samples of US$ 15/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
JIS G3461 STB 510 used for exchanger heat on inside and outside of the tube, such as water tubes, smoke tubes, superheater tubes, air preheater tubes, etc. of the boiler, and heat exchanger tubes, condenser tubes, catalyser tubes, etc. used in chemical and petroleum industries. However, it is no applicable to the steel tubes for heating furnace and steel heat exchanger tubes for low temperature service.
JIS G3461 STB 510 Boiler and Heat Exchanger Tubes Quick Details.Manufacture:Seamless; Electric resistance welded, Cold finished ,Hot finished.Wall thickness(WT): 2.0 mm--12.7 mm.Outer diameter (OD): 25 mm--139.8 mm
Standard: JIS G3461
Carbon Steel Tubes for Boiler and Heat Exchanger
JIS G3461 STB 510 specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for exchanging heat on the inside and outside of the tube, such as water tubes, smoke tubes, superheater tubes, air preheater tubes, etc. of the boiler, and heat exchanger tubes, condenser tubes, catalyzer tubes, etc. used in chemical and petroleum industries.
JIS G3461 STB 510 Boiler and Heat Exchanger Tubes Quick Details
Manufacture:Seamless; Electric resistance welded, Cold finished ,Hot finished
Wall thickness(WT): 2.0 mm--12.7 mm.
Outer diameter (OD): 25 mm--139.8 mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded.
Heat Treatment of JIS G3461 STB 510
| Grade | Heat treatment | ||||
| Hot finished seamless steel tube | Cold finished seamless steel tube | Electric resistance welded steel tube other than hot finished or cold finished steel tube | Finished electric resistance welded steel tube | Fold finished electric resistance welded steel tube | |
| STB 510 | Normalizing | ||||
| Standard:JIS G3461 | Grade | Chemical Composition Limits (%) | ||||
| C | Si | Mn | P | S | ||
| STB 510 | ≤ 0.25 | ≤ 0.35 | 1.00-1.50 | ≤ 0.035 | ≤ 0.035 | |
| Grade | Tensile Property (N/mm2) | Yield Point or Yield Strength (N/mm2) | Rockwell hardness HRB | Elongation (%) | ||
| OD ≥20 mm | 10 mm ≤OD <20 mm | OD <10 mm | ||||
| Longitudinal | Transverse | Transverse | ||||
| STB 510 | ≥ 510 | ≥ 295 | 92 max. | ≥ 25 | ≥ 20 | ≥ 17 |
| Tolerances | Division of wall thickness (mm) |
Division of method of manufacture | Hot finished seamless steel tube | Cold finished seamless steel tube | Electric resistance welded steel tube | |||
| Division of outside diameter (mm) | Under 100 | 100 or over | Under 40 | 40 or over | Under 40 | 40 or over | ||
| Tolerances on wall thickness % | Under 2 | --- | --- | +0.4mm | +22 0 |
+0.3 | +18 0 |
|
| 0 | 0 | |||||||
| 2 or over to and excl. 2.4 | +40 | --- | +20 0 |
+18 0 |
||||
| 0 | ||||||||
| 2.4 or over to or excl. 3.8 | +35 | +35 | ||||||
| 0 | 0 | |||||||
| 3.8 or over to or excl. 4.6 | +33 | +33 | ||||||
| 0 | 0 | |||||||
| 4.6 or over | +28 | +28 | ||||||
| 0 | 0 | |||||||
| Tolerances on thickness disparity% |
--- | Within 22.8 of wall thickness | --- | --- | ||||
| Division of outside diameter | Tolerances on outside diamete | |||
| Hot finished seamless steel tube | Cold finished seamless steel tube | Electric resistance welded steel tube other than cold finished | Cold finished electric resistance welded steel tube | |
| Under 25 | +0.4 -0.8 |
0.10 | 1.5 | 0.10 |
| 25 or over to and excl. 40 | 0.15 | 0.20 | 0.15 | |
| 40or over to and excl. 50 | 0.20 | 0.25 | 0.20 | |
| 50 or over to and excl 60 | 0.25 | 0.30 | 0.25 | |
| 60 or over to and excl. 80 | 0.30 | 0.40 | 0.30 | |
| 80 or over to and excl. 100 | 0.40 | +0.40 | 0.40 | |
| -0.60 | ||||
| 100 or over to and excl.12 | +0.4 -1.2 |
+0.40 -0.60 |
+0.40 -0.80 |
+0.40 |
| -0.60 | ||||
| 120 or over to and excl.160 | +0.40 -0.80 |
+0.40 -1.00 |
+0.40 | |
| -0.80 | ||||
| 160 or over to and excl.200 | +0.4 | +0.40 | +0.40 | +0.40 |
| -1.8 | -1.20 | -1.20 | -1.20 | |
| 200 or over | +0.4 | +0.40 | +0.40 | +0.40 |
| -2.4 | -1.60 | -1.60 | -1.60 | |
| Division | Tolerance on length | ||
| 50 mm or under in outside diameter |
7 m or under in length | +0.7 mm | |
| 0 | |||
| Over 7 m in length | Add 3 mm to the plus side permissible deviation given above for each increase of 3m or its fraction in length. However, the maximum value shall be 15 mm. | ||
| Over 50 mm in outside diameter |
7 m or under in length | +10mm | |
| 0 | |||
| Over 7 m in length | Add 3 mm to the plus side permissible deviation given above for each increase of 3m or its fraction in length. However, the maximum value shall be 15mm. | ||
Our company was established in 2012, is a comprehensive company integrating industry and trade. The company has successively won the honorary titles of provincial integrity enterprise and municipal excellent enterprise. We are mainly engaged in various metal related products. Such as pipes, pipe fittings, rods, coils, profiles, medium and heavy plates, narrow strips and other types of materials. The warehouse has a variety of products of different specifications and materials, and the capacity is maintained at 30,000-50,000 tons/month. Products are widely used in petroleum, chemical, electric power, coal, machinery, high and low pressure boiler tubes, hydraulic props, ships and other industries. We make full use of the advantages of self-operated export rights and enter the international market. Our customers are located in South Korea, Canada, Iran, Pakistan, Indonesia, Vietnam, South America and other countries, and we have offices in Indonesia and Vietnam. The quality of our products is enjoyed at home and abroad. high reputation. We adhere to the business philosophy of "integrity service, win-win cooperation, customer first", and provide one-stop steel solutions for global customers. Welcome friends from all over the world to visit our company. We are looking forward to establishing business relationships and personal friendships with you.
Q:How do you control quality?
A:Mill test certification is supplied with shipment,third party inspection is avaliable.
Q:What are the advantages of your company?
A:We have many professionals,technical personnel,more competitive prices and best after-sales service than other stainless steel companies.
Q:How many coutries you already exported?
A:Exported to more than 50 countries mainly from Arab, Kuwait, Egypt, Turkey, Jordan, Brazil, India, Indonesia, Korea, etc.
Q:Can you provide sample?
A:Small sample in store and can provide the sample for free.Customized samples will take about 5-7days
Q:Why should you buy from us not from other suppliers?
A:Diversified products, direct supply from manufacturer.
Q:What is your terms of payment ? A:we accept T/T ,L/C ,D/A,D/P, Western union, paypal ,The payment method can be negotiated by both parties according to the actual situation.
Please Please leave your enquiry in the message box at the bottom of the product page and click SEND, we will contact you as soon as possible !
){kind=link}