09CrCuSb (ND steel) steel pipe used in power plants and refineries to manufacture economizers, air preheaters, heat exchangers and evaporators that work in high-sulfur flue gas to protect against sulfur-containing flue gas condensation.
09CrCuSb (ND steel) resistant to sulfuric acid low temperature dew point corrosion steel (ND steel, ND steel, 09CrCuSb steel, 09CrCuSb steel, etc.). Usually called 09 club.
09CrCuSb ND steel is a new type of steel resistant to sulfuric acid low temperature dew point corrosion developed by Shanghai Institute of materials and Xingcheng Special Steel from 1987 to 1990
ND steel is a low alloy structural steel. Compared with other steels such as low carbon steel, corten and cr1a, ND steel has excellent corrosion resistance and mechanical properties.
Chemical Composition
| Grade |
Chemical Composition(%) |
| C |
Si |
Mn |
Cr |
Cu |
Sb |
P |
S |
| 09CrCusb |
≤0.10 |
0.20-0.40 |
0.35-0.65 |
0.70-1.20 |
0.25-0.45 |
≤0.10 |
≤0.10 |
≤0.10 |
Mechanical Properties
| Grade |
Tenslle Strength(MPa) |
Yield Strength(MPa) |
Elongation(%) |
| 09CrCuSb |
390-550 |
≥245 |
≥25 |
Chemical composition in GB 150.2-2011
| 09CrCuSb |
| C |
Si |
Mn |
P |
S |
Cr |
Cu |
Sb |
| ≤0.12 |
0.20~0.40 |
0.35~0.65 |
≤0.030 |
≤0.020 |
0.70~1.10 |
0.25~0.45 |
0.04~0.10 |
Corrosion resistance
In sulfuric acid of medium temperature and concentration, ND steel is passivated due to dissolution. A passivation layer rich in Cu, Cr, Sb and other metal elements is formed on the surface of ND steel, which has high sulfuric acid corrosion resistance.
09CrCuSb welding material
The carbon equivalent of 09CrCuSb is moderate, the content of S and P is not high, so its welding performance is good, preheating is not necessary during welding, and heat treatment is not required after welding ND steel special NDS electrode is used for welding.
09CrCuSb (ND steel) steel is developed for coal-fired boilers, oil-fired boilers; heat exchangers for electric furnaces, pipes, chimneys, boiler air preheaters, economizers, heat exchangers, condensing coolers, evaporators, etc. Hot-rolled steel sheets and steel pipes with excellent resistance to sulfuric acid dew corrosion. Its superior resistance to sulfuric acid dew point corrosion and very high cost performance is the best material that can completely replace stainless steel and surpass stainless steel (in terms of sulfuric acid dew point corrosion resistance). ND steel has great economic significance, in line with today's high efficiency, longevity and energy saving. "Green" concepts such as environmental protection and national development policy orientation.
Advantage of 09CrCuSb (ND steel)
ND steel, 09CrCuSb steel, is the most ideal steel for "sulfuric acid resistant low temperature dew point corrosion" at home and abroad. ND steel is widely used in the manufacture of economizers, air preheaters, heat exchangers and in high sulfur flue gas. Equipment such as evaporators, used to resist corrosion of sulfur-containing flue gas dew point. ND steel also has the ability to resist chloride ion corrosion. The main reference index of ND steel pipe (soaked in 50% H2SO4 solution at 70 °C for 24 hours) is higher than that of carbon steel and stainless steel.
1. Materials: Take the raw materials out of the raw material warehouse or procurement channels, and conduct inspection and sorting;
2.temperature control: according to the required performance of the product, choose the appropriate temperature, and control it within a certain range;
3. Heating: Use hot blast stove or other heating methods to heat raw materials to the required temperature;
4.annealing: the heated raw materials into the torch box for annealing treatment, in order to improve the mechanical properties of raw materials;
5. Hot rolling: Put the heated raw materials into the hot rolling mill, and process the raw materials through pressure to obtain the required products;
6.cooling: hot rolled products with water or other coolant for cooling, to ensure the stability of the product structure;
7.detection: physical and chemical performance test to determine whether it meets the requirements;
8. Finishing: Organize the products, label them, and prepare them for loading and delivery.
09CrCuSb seamless steel pipe is widely used in the manufacture of economizer, air heat preheater, heat exchanger, evaporator and other equipment serving in high sulfur gas, which is used to resist condensation corrosion of sulfur-containing flue gas. It is characterized by resistance to low temperature sulfuric acid dew point corrosion of flue gas below 200 ° C. It is a new clean energy-saving product.
The market price of the special sulfuric acid dew point corrosion resistant pipe for 09CrCuSb boiler heat exchanger is about 9000 yuan per ton, only 40% of the price of stainless steel pipe of the same specification. When it is used in sulfur-containing medium, its corrosion resistance is no less than that of stainless steel, and the corrosion rate is 3.481mg/cm2. H (34.81g / m2. H) in sulfuric acid solution of 70 ºC and 50%. The corrosion resistance of ND steel (09CrCuSb) is more than 3 times that of 321 stainless steel and 7 times that of 20g. It can be seen that ND steel is the first choice material for the experimental chemical plant in the environment of sulfur-containing medium.
Baowu Aluminum (Shandong) Co., Ltd. is located in Dongchangfu county, which is the largest aluminum manufacturing county in north China. The factory is only one kilometer from the Jiliao expressway, which make our transportation more convenient. Our total investment is more than one billion yuan for two large factories. The factory covers an area of 120, 000 Square Meters and The company employs more than 500 staff, including over 60 engineering technicians. Our annual output capacity is more than 120, 000 tons of aluminium profiles. Baowu has been awarded the honorary titles of "China Patent Shandong Star Enterprise", "Key Enterprise of Shandong Architectural Profile Industry", "Famous Brand of the Province Construction Machinery Industry", "Shandong Famous Brand", "Well-known Trade Mark of Shandong Province", "China Energy-saving Product Certification", etc. Our company was appraised as a national medium-sized enterprise by the Agricultural Ministry of China in 2004. As a professional aluminum profiles manufacturer, we specialized in manufacturing building door and window, decoration, curtain wall and industrial aluminum profiles.
We have imported advanced manufacturing, checking and testing equipment of aluminum profiles from USA, Germany, Japan, Italy and Switzerland. With advanced checking and testing method and perfect quality guarantee system, our products are produced in strict accordance with the GB/5237 standard and have passed the qualification of ISO9001: 2000 International Quality Management System, ISO14001: 2004 Environmental Management System, 18000: 2001 Occupational Health Management System and 8000: 2001 Social Responsibility Management system. Meanwhile, we provides our customer with many kinds of finishes, such as sand blasting, polishing, brush, anodizing, electrophoresis, ceramic electrophoresis, sparkling electroporesis, powder coating, thermal insulation, fluorocarbon spraying (PVDF COATING), wood grain, etc. With stable product quality and perfect after-sales service, Baowu has been recognized as qualified supplier by lots of domestic famous enterprises such as Country Garden, Haier, Goertek, etc. Our aluminum profiles have been exported to many countries, such as USA, Brazil, Vietnam, India, South Korea, Australia, Germany, Kenya, Russia, Israel, Japan, etc.
Q:How do you control quality?
A:Mill test certification is supplied with shipment,third party inspection is avaliable.
Q:What are the advantages of your company?
A:We have many professionals,technical personnel,more competitive prices and best after-sales service than other stainless steel companies
Q:How many coutries you already exported?
A:Exported to more than 50 countries mainly from Arab, Kuwait, Egypt, Turkey, Jordan, Brazil, India, Indonesia, Korea, etc
Q:Can you provide sample?
A:Small sample in store and can provide the sample for free.Customized samples will take about 5-7days
Q:Why should you buy from us not from other suppliers?
A:Diversified products, direct supply from manufacturer.
Q:What is your terms of payment ?
A:we accept T/T ,L/C ,D/A,D/P, Western union, paypal ,The payment method can be negotiated by both parties according to the actual situation.
Please Please leave your enquiry in the message box at the bottom of the product page and click SEND, we will contact you as soon as possible!
Audited Supplier 
){kind=link}
){kind=link}