ASME SA192 Seamless Carbon Steel Tubes Are Sold Directly by Chinese Manufacturers for High Pressure Boilers

• After-sales Service: Yes
• Warranty: Yes
• Type: Seamless
• Model NO.: ASME SA192
• Technique: Hot Rolled
• Surface Treatment: Black
• Usage: Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Mining
• Section Shape: Round
• Delivery Time: 15-21days
• Product Name: ASME SA192 Seamless Steel Pipe
• Product Type: Seamless Steel Tube
• Transport Package: Standard Export Packing
• Specification: 10mm-600mm
• Trademark: BW
• Origin: China
• HS Code: 730419
• Production Capacity: 50000tons/Month

Product Description

Product Description

ASTM A192,ASME SA192 High-Pressure Seamless Carbon Steel Boiler And Superheater Tubes sizes and thicknesses usually furnished to this specification are 1 ⁄ 2 in. to 7 in.outside diameter and 0.085 to 1.000 in.

ASTM A192 Steel Tubes covers minimum-wall-thickness,seamless carbon steel boiler and superheater tubes for high-pressure service.
 ASTM A192High-Pressure Seamless Carbon Steel Boiler And Superheater Tubes sizes and thicknesses usually furnished to this specification are 1 ⁄ 2 in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness.

Scope
1 This standard applies to seamless carbon steel boilers and superheater tubes with minimum wall thickness for rolling.
2 The general dimensions and thickness of the pipe provided by the standard are: outer diameter 1/2~7in. (12.7~177.8mm), minimum wall thickness 0.085~ l.00in. (2.2~25.4mm). Pipes of other sizes are also available, but these pipes are to comply with all other requirements of this standard.
3 Mechanical performance requirements are not applicable to pipes with an inner diameter of less than 1/8 in. (3.2 mm) or a thickness of less than 0.015 in. (0.4 mm).
4.When these products are used in the ISO Boiler Construction Recommended Practices, the requirements of this standard are supplemented and replaced by the requirements of the A520 standard.
5.Values expressed in inches per inch or SI units shall be considered as standard values. In this standard, SI units are shown in parentheses. Since the values of the two unit systems are not exactly equal, the two unit systems must be used independently. If mixed, it will lead to inconsistency with this standard. Unless the standard number with the "M" mark is used in the order, it will be used in units of inches.

reference standard
ASTM Standard:
A450/A450Mcarbon steel, ferritic alloy steel and austenitic alloy steel pipe for General requirements.
A 520 complies with the requirements of ISO boiler construction recommendations for high temperature carbon steel seamless and resistance welded tubular products.

Manufacture
ASTM A192 High-Pressure Seamless Boiler And Superheater Tubes are made by the seamless process and shall be either hot-finished or cold-finished, as specified.

Heat treatment
Hot rolled tubes do not require heat treatment. After the cold drawing, the cold drawn tube shall be heat treated at 1200 °F (650 °C) or higher.

Chemical Composition of ASTM A192,ASME SA192 Boiler And Superheater Tubes

 

Carbon, %	0.06-0.18
Manganese, %	0.27-0.63
Phosphorus, max, %	0.035
Sulfur, max, %	0.035
Silicon, max, %	0.25

 
 
Mechanical Properties of ASTM A192,ASME SA192 Boiler And Superheater Tubes

Tensile strength, min, ksi [MPa]	47 [325]
Yield strength, min, ksi [MPa]	26 [180]
Elongation in 2 in. or 50 mm, min, %	35
Brinell Hardness Number (Tubes 0.200 in. [5.1 mm] and over in wall thickness)	137 HBW
Rockwell Hardness Number (Tubes less than 0.200 in.[5.1 mm] in wall thickness)	77 HRBW

Tolerances of  Wall Thickness

Outside Diameter, in. [mm]	Wall Thickness, %
	0.095[2.4] and Under		Over 0.095 to 0.150 [2.4 to 3.8], incl		Over 0.150 to 0.180 [3.8 to 4.6], incl		Over 0.180,[4.6]
	Over	Under	Over	Under	Over	Under	Over	Under
Seamless, Hot-Finished Tubes
4 [101.6] and under	40	0	35	0	33	0	28	0
Over4[101.6]	....	....	35	0	33	0	28	0
Seamless, Cold-Finished Tubes
	Over				Under
1 1 ⁄ 2 [38.1] and under	20				0
Over 1 1 ⁄ 2 [38.1]	22				0

Tolerances of  Outside Diameter

Outside Diameter,in. [mm]	Permissible Variations, in. [mm]
	Over	Under
Hot-Finished Seamless Tubes
4 [101.6] and under	1 ⁄ 64 [0.4]	1 ⁄ 32 [0.8]
Over 4 to 7 1 ⁄ 2 [101.6 to 190.5], incl	1 ⁄ 64 [0.4]	3 ⁄ 64 [1.2]
Over 7 1 ⁄ 2 to 9 [190.5 to 228.6], incl	1 ⁄ 64 [0.4]	1 ⁄ 16 [1.6]
Cold-Finished Seamless Tubes
Under 1 [25.4]	0.004 [0.1]	0.004 [0.1]
1 to 1 1 ⁄ 2 [25.4 to 38.1], incl	0.006 [0.15]	0.006 [0.15]
Over 1 1 ⁄ 2 to 2 [38.1 to 50.8], excl	0.008 [0.2]	0.008 [0.2]
2 to 2 1 ⁄ 2 [50.8 to 63.5], excl	0.010 [0.25]	0.010 [0.25]
2 1 ⁄ 2 to 3 [63.5 to 76.2], excl	0.012 [0.3]	0.012 [0.3]
3 to 4 [76.2 to 101.6], incl	0.015 [0.38]	0.015 [0.38]
Over 4 to 7 1 ⁄ 2 [101.6 to 190.5], incl	0.015 [0.38]	0.025 [0.64]
Over 7 1 ⁄ 2 to 9 [190.5 to 228.6], incl	0.015 [0.38]	0.045 [1.14]

 
Tolerances of Length

Method of Manufacture	Outside Diameter, in. [mm]	Cut Length,in. [mm]
		Over	Under
Seamless, hot-finished	All sizes	3 ⁄ 16 [5]	0 [0]
Seamless, cold-finished	Under 2 [50.8]	1 ⁄ 8 [3]	0 [0]
	2 [50.8] and over	3 ⁄ 16 [5]	0 [0]
	2 [50.8] and over	3 ⁄ 16 [5]	0 [0]

Detailed Photos

 

Production process

1. Materials: Take the raw materials out of the raw material warehouse or procurement channels, and conduct inspection and sorting;
2. temperature control: according to the required performance of the product, choose the appropriate temperature, and control it within a certain range;
3. Heating: Use hot blast stove or other heating methods to heat raw materials to the required temperature;
4.annealing: the heated raw materials into the torch box for annealing treatment, in order to improve the mechanical properties of raw materials;
5. Hot rolling: Put the heated raw materials into the hot rolling mill, and process the raw materials through pressure to obtain the required products;
6. cooling: hot rolled products with water or other coolant for cooling, to ensure the stability of the product structure;
7. detection: physical and chemical performance test to determine whether it meets the requirements;
8. Finishing: Organize the products, label them, and prepare them for loading and delivery.

required mechanical properties test
1 Flattening test - Take 2 tubes per batch or the rest, and perform a flattening test on each sample at each end.
2 Flare test-Two tubes are taken from each batch or the remainder, and a flare test is performed on each sample at each end. These two pipes should be different from the two taken for the flattening test.
3 Hardness test - A Brinell or Rockwell hardness test is performed on a sample of 2 tubes per batch. The term "batch" applies to all tubes of the same furnace, the same nominal diameter, and the same wall thickness before cutting. When the final heat treatment is carried out in a periodic furnace, a batch of all the tubes including only the same size and the same heat number are heat-treated under the same heat treatment furnace. When the final heat treatment is carried out in a continuous furnace, the batch includes the same Dimensions, same calories, and all tubes with the same temperature, the same heating time and furnace speed in the same furnace.
4 Hydrostatic test-Each pipe shall be tested for water pressure or may be replaced by a non-destructive test when specified by the purchaser.

Application:
ASTM A192,seamless carbon steel boiler and superheater tubes for high-pressure service.

Packaging & Shipping

Our Advantages

Our company was established in 2012, is a comprehensive company integrating industry and trade. The company has successively won the honorary titles of provincial integrity enterprise and municipal excellent enterprise. We are mainly engaged in various metal related products. Such as pipes, pipe fittings, rods, coils, profiles, medium and heavy plates, narrow strips and other types of materials. The warehouse has a variety of products of different specifications and materials, and the capacity is maintained at 30,000-50,000 tons/month. Products are widely used in petroleum, chemical, electric power, coal, machinery, high and low pressure boiler tubes, hydraulic props, ships and other industries. We make full use of the advantages of self-operated export rights and enter the international market. Our customers are located in South Korea, Canada, Iran, Pakistan, Indonesia, Vietnam, South America and other countries, and we have offices in Indonesia and Vietnam. The quality of our products is enjoyed at home and abroad. high reputation. We adhere to the business philosophy of "integrity service, win-win cooperation, customer first", and provide one-stop steel solutions for global customers. Welcome friends from all over the world to visit our company. We are looking forward to establishing business relationships and personal friendships with you.

Certifications

 

FAQ

Q:How do you control quality?
A:Mill test certification is supplied with shipment,third party inspection is avaliable.

Q:What are the advantages of your company?
A:We have many professionals,technical personnel,more competitive prices and best after-sales service than other stainless steel companies

Q:How many coutries you already exported?
A:Exported to more than 50 countries mainly from  Arab, Kuwait, Egypt, Turkey, Jordan, Brazil, India, Indonesia, Korea, etc

Q:Can you provide sample?
A:Small sample in store and can provide the sample for free.Customized samples will take about 5-7days.
 
Q:Why should you buy from us not from other suppliers?
A:Diversified products, direct supply from manufacturer.

Q:What is your terms of payment ?
A:we accept T/T ,L/C ,D/A,D/P, Western union, paypal ,The payment method can be negotiated by both parties according to the actual situation.

Please Please leave your enquiry in the message box at the bottom of the product page and click SEND, we will contact you as soon as possible!