| After-sales Service: | Yes |
|---|---|
| Warranty: | Yes |
| Type: | Seamless |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
EN 10216-2 P235GH Seamless steel tubes for pressure purposes -Technical delivery conditions: Non-alloy and alloy steel tubes with specified elevated temperature properties.
Material P235GH is non-alloy steel with specified high temperature properties, good plasticity, toughness, cold bending and welding properties, specified in German and European standards DIN EN10216 and DIN EN 10028. EN 10216 Part 2 P235GH seamless tube is mainly for pressure purposesuch as the manufacturing of boilers and heat exchangers, steam tubes and pressure vessels.
P235GH is a normalized carbon low alloy steel. "P" means "weldable", "G" means "softened annealed" and "H" means "hardened". The main materials of EN10216-2 including: P235GH, P265GH, 16Mo3, 10CrMo55, 13CrMo45, 10CrMo910, 25CrMo4 and so on. P235GH's chemical composition makes it ideal for high-temperature applications, and the material is used by manufacturers in the oil, gas and petrochemical industries.
P235GH steel pipe is from European specification EN 10216-2 seamless steel tubes for pressure vessels,boilers,heat exchangers,super heaters,power piping,processing piping.For heat treatment,P235GH steel pipe does Normalized treatment with temperature 880 to 940 Deg.Centigrade.The cooling medium in Air.Rolling typies can be hot finished or cold finished.
Comparasion with P265GH steel pipe and P235GH steel pipe properties,chemical composition is very similar,only P265GH steel pipe need a higher carbon contains.Mechanical properties,P265GH steel pipe owned higher yield strength above 265 Mpa and tensile strength within 410-570 Mpa.P235GH steel pipe yield strength above 235 Mpa and tensile strength within 360-500 Mpa.Various diameters of P235GH steel pipe and P265GH steel pipes stock in our warehouse ready for shipment.
EN Specification alloy steel Tubes are used for high temperature service applications.Seamless Alloy Steel Tubes according to EN 10216-2 Grade P235GH are reheated and furnished in full annlealed,isothermal annealed or normalised quenched and tempered condition .EN 10216-2 Grade P235GH Alloy Steel Seamless Tubes have a typical chemistry with additions of max 0.30 Chromium and max 0.08 Molybdenum.Bearing minimum tensile strength of 360 Mpa and maximum tensile strength 500 Mpa, EN 10216-2 Grade P235GH Tubes have a minimum yield strength of 235 Mpa.
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
|---|---|---|---|---|---|---|---|---|---|
| max 0.16 | max 0.35 | max 1.20 | 0.025 | 0.01 | max 0.08 | max 0.30 | max 0.30 | max 0.30 | V max 0.02 Ti max 0.04 Al min 0.020 |
| Steel grade | Upper yield strength or proof strength R eH or Rp 0,2 for Wall Thickness T min. |
Tensile Strength Rm |
Elongation A min. % a |
|||||
| Steel name | Steel number |
T ≤ 16 | 16 < T ≤ 40 | 40 < T ≤ 60 | 60 < T ≤ 100 | l | t | |
| MPa * | MPa * | MPa * | MPa * | MPa * | ||||
| P235GH | 1.0345 | 235 | 225 | 215 | - | 360 to 500 | 25 | 23 |
| Outside Diameter D mm | Tolerances on D |
Tolerances on T for a T/D ratio | |||
| ≤ 0,025 | > 0,025 ≤ 0,050 |
> 0,050 ≤ 0,10 |
> 0,10 | ||
| D ≤ 219,1 | ± 1% or ± 0.5mm whichever is the greater |
± 12,5% or ± 0.4mm whichever is the greater | |||
| D > 219,1 | ± 20% | ± 15% | ± 12,5% | ± 10% a | |
| a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T | |||||
| Tolerances on inside diameter | Tolerances on T for a T/d ratio | |||||
| d | d min | ≤ 0,03 | > 0,03 ≤ 0,06 |
> 0,06 ≤ 0,12 |
> 0,12 | |
| ± 1% or ± 2 mm whichever is the greater | (+ 2% ,0)or (+ 4 mm,0) |
whichever is the greater | ± 20% | ± 15% | ± 12,5% | ± 10% a |
| a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T | ||||||
| Outside diameter D mm | Tolerances on D | Tolerances on T min for a T min /D ratio | |||
| ≤ 0,02 | > 0,02 ≤ 0,04 |
> 0,04 ≤ 0,09 |
> 0,09 | ||
| D ≤ 219,1 | ± 1% or ± 0.5mm whichever is the greater |
(+ 28%,0) or (+ 0.8 mm,0) whichever is the greater | |||
| D > 219,1 | + 50% 0 |
+ 35% 0 |
+ 28% 0 |
+ 22% a 0 |
|
| a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T | |||||
| Tolerances on inside diameter |
Tolerances on T min for a T min /d ratio |
|||
| d | d min | ≤ 0,05 | > 0,05 ≤ 0,1 |
> 0,1 |
| ± 1% or ± 2 mm whichever is the greater |
(+2%,0) or (+ 4 mm,0) whichever is the greater | + 35% 0 |
+ 28% 0 |
+ 22% a 0 |
| a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T | ||||
| Length L | Tolerance on exact length |
| L ≤ 6000 | +10 0 |
| 6000 < L ≤ 12 000 | +15 0 |
| L > 12 000 | + by agreement 0 |
Used for boiler water pipe, smoke pipe, superheater pipe, air preheating pipe, etc.
Our company was established in 2012, is a comprehensive company integrating industry and trade. The company has successively won the honorary titles of provincial integrity enterprise and municipal excellent enterprise.
We are mainly engaged in various metal related products. Such as pipes, pipe fittings, rods, coils, profiles, medium and heavy plates, narrow strips and other types of materials. The warehouse has a variety of products of different specifications and materials, and the capacity is maintained at 30,000-50,000 tons/month. Products are widely used in petroleum, chemical, electric power, coal, machinery, high and low pressure boiler tubes, hydraulic props, ships and other industries. We make full use of the advantages of self-operated export rights and enter the international market. Our customers are located in South Korea, Canada, Iran, Pakistan, Indonesia, Vietnam, South America and other countries, and we have offices in Indonesia and Vietnam. The quality of our products is enjoyed at home and abroad. high reputation.
We adhere to the business philosophy of "integrity service, win-win cooperation, customer first", and provide one-stop steel solutions for global customers. Welcome friends from all over the world to visit our company. We are looking forward to establishing business relationships and personal friendships with you.
Why choose us?
Q:How do you control quality?
A:Mill test certification is supplied with shipment,third party inspection is avaliable.
Q:What are the advantages of your company?
A:We have many professionals,technical personnel,more competitive prices and best after-sales service than other stainless steel companies
Q:How many coutries you already exported?
A:Exported to more than 50 countries mainly from Arab, Kuwait, Egypt, Turkey, Jordan, Brazil, India, Indonesia, Korea, etc
Q:Can you provide sample?
A:Small sample in store and can provide the sample for free.Customized samples will take about 5-7days
Q:Why should you buy from us not from other suppliers?
A:Diversified products, direct supply from manufacturer.
Q:What is your terms of payment ?
A:we accept T/T ,L/C ,D/A,D/P, Western union, paypal ,The payment method can be negotiated by both parties according to the actual situation.
Please Please leave your enquiry in the message box at the bottom of the product page and click SEND, we will contact you as soon as possible !
){kind=link}